Fortigate set ip address management from console

Share this post to your friends !

DanieBlog - Fortigate set ip address management from console. In this article, we will learn how to configure the ip management address for the Fortigate firewall from the console.

If you’ve read my previous article on how to connect the Fortigate console from a Linux computer, now will be the next step.

You know, every network device has a default ip address, default account information. You can ask the supplier, ask the seller or search on google, that is very easy.

If you cannot know the Fortigate ip management address because it has been changed, or you purchased a used device. This article may help you a bit, I hope.

fortigate-set-ip-address-management-from-console Fortigate set ip address management from console
Fortigate set ip management from console.

How Fortigate set ip management from console

Now, when you have connected the console to the Fortigate firewall, enter the admin user, the password is blank.

Welcome to minicom 2.7.1

OPTIONS: I18n                                                                
Compiled on Aug 13 2017, 15:25:34.                                           
Port /dev/ttyUSB0, 13:17:34                                                  
                                                                             
Press CTRL-A Z for help on special keys                                      
                                                                             
                                                                             
                                                                             
FG200D3G12800336 #

Next, type the following command to configure the interface.

FG200D3G12800336 # config system interface

Now, you need to find the interface you need to configure. There are many other guides that will use port1, but not always.

Use the command below to display the current configuration of the firewall.

FG200D3G12800336 (interface) # show full-configuration

You should see lines like this.

    edit "mgmt"
        set vdom "root"
        set vrf 0
        set fortilink disable
        set priority 0
        set dhcp-relay-service disable
        set ip 192.168.1.99 255.255.255.0
        set allowaccess ping https ssh http fgfm
        set fail-detect disable
        set pptp-client disable
        set arpforward enable
        set broadcast-forward disable

You can immediately see the ip address of interface management. But if you want to reset the ip address, type the following command.

FG200D3G12800336 (interface) # edit mgmt

Next, you enable some services on this interface. The purpose is for you to access it through the browser.

FG200D3G12800336 (mgmt) # set allowaccess ping http https telnet ssh

And then you set the ip management address.

FG200D3G12800336 (mgmt) # set ip 192.168.100.100 255.255.255.0

Finally, you finish setting up ip management.

FG200D3G12800336 (mgmt) # next

FG200D3G12800336 (interface) # end

FG200D3G12800336 #

Conclusion

Now, you can open your browser and try to access the ip management address you just set for the fortigate firewall. Ex: http://192.168.100.100.

If you liked this article, then please subscribe to our YouTube Channel for more video tutorials. You can also find us on Twitter and Facebook.


Share this post to your friends !
If you appreciate what we share in this blog, you can support us by:
  1. Stay connected to: Facebook | Twitter | Google Plus | YouTube
  2. Subscribe email to recieve new posts from us: Sign up now.
  3. Start your own blog with SSD VPS - Free Let's Encrypt SSL ($2.5/month).
  4. Become a Supporter - Make a contribution via PayPal.
  5. Support us by purchasing Ribbon Lite Child theme being using on this website.

We are thankful for your support.

single post bottom banner
««

Got something to say? Join the discussion

Please keep in mind that all comments are subject to our Comment Policy. Your email address will not be published.
This site uses Akismet to reduce spam. Learn how your comment data is processed.